Push Back Pallet Racking
Dexion Push Back pallet racking works on the Last in – First out Principle (LIFO)
Special channels with wheeled conveyors or rollers sloping at approx four-degrees are integrated into one sub-frame of the P90 racking system. This system is sometimes known as dynamic pallet racking.
One after the other, up to ten pallets can be pushed into these channels and once a pallet is picked from the pick face, the rest roll forward automatically under a controlled speed. Individual pallets further back in the rack cannot be accessed directly.
Speedlock P90 Push Back racking can also be used to provide additional storage space in otherwise unusable areas such as above cross-aisles or around dock-levelers. When fully utilised, very high occupancy rates can be achieved, compared to drive-in racking or block-stacking.
- Pallet storage on sloping wheel/roller conveyors
- Accessible by Last in – First out (LIFO) principle
- Storage and removal from one side only
- Up to 75% increase in storage capacity
Please call us on 01553 666010 for more information.
Dexion P90 Push Back is a dynamic storage solution which is based on our P90 Pallet Racking System including wheel/roller conveyors.
Pallets are stored on the wheeled/roller conveyors and each new pallet pushes the previously stored pallet back into the channel. Loading and unloading only takes place at the racking front so that forklift truck movements and cycle times are minimised.
Due to the sloping wheel/roler conveyors the rear pallets always arrive at the racking front after the unloading of the foremost pallet.
- Channel Depth: Up to 10 Pallets
- Channel Height: Up to 12000 mm